24VDC PLC-Driven Lubricator
Complete control of your lubrication program is now available with the MEMOLUB® 24VDC PLC-driven lubricator. The unique design allows the user to power and cycle the lubricator “on demand” using a PLC (Programmable Logic Controller). This gives the user greater control in preventing under- or over-lubricating their equipment such as robots, conveyors, rack & pinions, slides or any PLC-driven equipment. The 350 psi output pressure of the MEMOLUB permits the lubricator to be conveniently mounted up to 40 feet away from the lubrication point(s). This 24VDC PLC-driven model is ideal for the OEM, Pulp & Paper, Automotive, Packaging and Machine Tool industries. The MEMOLUB® 24VDC PLC-driven lubricator is available in 3 sizes and uses low cost pre-filled replaceable cartridges.
• Media Grease ( to NLGI #2) or Oil • Lubricant Cartridge Capacity 120cc , 240cc, 480cc (Replaceable) • Delivery Method - Metered Quantity • Lubricant Flow Rate - 0.63cc / Stroke - standard • Strokes per day - Stroke Frequency Programmed from Customers PLC • Operating Pressure - 350psi (25 bar) • Operation - Electro-Mechanical- Positive Replacement Pump • Feed Type - Single-Point or Multi-Point • Temperature Range ** - 5°F to 141°F (-15°C to 50°C) • Power Supply External - 24VDC power supply • External On/Off Control - Yes • Mounting Thread Size - 1/4" NPT(M) - (1/8" NPT(M) available) • Multi-Point Compatible - Yes • Splitter Block Compatible * - Yes • Remote Installation (single-point) - Up to 40 feet (12 meters)