Aremco-Bond 616 Electrically and Thermally Conductive Adhesive

Description

Aremco-Bond 616, a new silver-filled, low-cost, high temperature, electrically and thermally conductive adhesive is designed for electrical and electronic assembly applications to 360°F (182°C). The advanced, two-part, electrically and thermally conductive adhesive is formulated using low-cost silver-coated glass spheres. It exhibits a volume resistivity of less than 0.005 ohm-cm at room temperature, and a thermal conductivity of 0.4 W/m-oK. The continuous operating temperature range is 360°F (182°C) and intermittent use temperature is 400°F (205°C). The tensile shear strength is 1,000 psi and Shore D hardness is 78. Mixed viscosity range is 50,000 to 60,000 cP. Aremco-Bond 616 mixes easily in a 1-to-1 ratio by weight. It sets at room temperature in 24 hours or can be heat cured in 2 hours at 200°F. It comes in pint, quart and gallon kits and can be specially packaged individed bi-packs upon request.

Specs

  • electrically and thermally conductive
  • 360°F operating temperature range
  • 400°F intermittent temperature range 
  • 50,000 to 60,000 cP  viscosity range
Be the first to review this product
Add your review:
RELATED STORIES