Cable Tension Meter

Description

Quick-Check meter quickly attaches and measures tension of guy wires, overhead wires, elevator cables, etc. The hand-held, lever-operated meter features a digital loadcell with LCD display that accurately calculates cable tension. Sheaves accommodate rated wire sizes of 3/16 to 3/4 in.

Specs

*Wire sizes: 3/16 inch through 3/4 inch *Accuracy: + 3% instrument capacity (calibrated to specific wire size & type + 5% with same wire diameter as calibrated but different wire type) *Number of calibrations: Up to 15 can be stored independently *Operating range: -4°F to 140°F (-20°C to 60°C) *Loading error: Cable elongation of only 0.08 inch (2mm) *Display: Dot-graphic LCD display supports full text and 1 inch high digits. *Sheave range: Sheave accommodates rated wire size and 1/2” smaller. Sheaves are not compatible with larger wire sizes – order additional sheaves for wire sizes. *Suggested wire calibrations: Calibrate each wire diameter needed with the most appropriate sheaves. If two wire types are used of the same diameter (e.g. ½” 7x7 and ½” 6x19), calibrate each type independently if accuracy is critical. *Environment protection: Suitable for continued outdoor use. *Tension units of measure: pound-force, kilogram force, Newtons *Resolution: configurable low/med/high *Recalibration: At user discretion. Commonly 24 months but should be more frequently with heavy use. Factory recalibrations conducted typically in 2-4 days. On-site recalibration may be possible through your Dillon distributor. *Size: 10 x 23 x 3 inch (25 x 59 x 8 cm) *Weight: Approx 11 lb (5 kg)
Be the first to review this product
Add your review:
RELATED STORIES