CP2060, a new high temperature, silicon carbide filled, protective coating developed by Aremco Products, Inc., is now used to coat metal components and structures used in industrial applications to 500 oF (260 ºC). FEATURES Corr-Paint tm CP2060 is a two part, silicon carbide filled, 100% solids, epoxy-novolac, abrasion resistant system used to protect steel components and structures used in aircraft, automotive, chemical processing, foundry, and power generation plants for applications to 500 oF (260 ºC). Corr-Paint tm CP2060 provides excellent adhesion to marginally prepared metal surfaces and exceptional corrosion resistance. It is resistant to a wide range of chemicals including acetic acid, jet fuel, alcohols, diesel fuel, gasoline, hydrochloric acid, nitric acid, phosphoric acid, potassium chloride, sodium chloride, toluene and xylene. It also provides good thermal shock, salt spray, and UV resistance. Corr-Paint tm CP2060 is a two-part system that is packaged in pre-weighed kits for a 10:8 mix ratio by weight. CP2060 mixes to a thick paste and is applied using a trowel or spatula. It sets and cures fully at room temperature in 24 hours. Typical film thickness is 50 mils for a single coat. Corr-Paint tm CP2060 is part of a series of high temperature protective coatings for applications from room temperature to 1500 ºF. Products are available from stock in pint, quart, gallon and five-gallon pails.
Be the first to review this product
Add your review: