BlueWave MX-250 Cures Sensitive Materials
Description
BlueWave MX-250 LED flood-curing systems offer unique curing flexibility and expansion capabilities in a smaller unit. Designed with a user-friendly touchscreen interface, this system offers higher, more consistent curing intensities covering a 50 x 50 mm active curing area to guarantee optimal cures for manufacturers.
With three different wave-length LED options (365, 385 or 405 nm), this system’s high-intensity emitter can be easily mounted to robotic arms or further from the controller without fear of intensity variations. The unit further expands on the MX Series of cure systems from Dymax. Its updated controller can run either MX-150 spot-cure emitters or MX-250 flood emitters, providing customers with greater flexibility in switching between LED spot and flood-curing units.
Specs
| Output Frequency | RediCure – 365 nm |
|---|---|
| PrimeCure – 385 nm | |
| VisiCure – 405 nm | |
| Intensity Output At Array Surface* | RediCure – 684 mW/cm² |
| PrimeCure - 955 mW/cm² | |
| VisiCure - 1,090 mW/cm² | |
| Intensity Output At 25 mm Working Distance* | RediCure – 255 mW/cm² |
| PrimeCure - 355 mW/cm² | |
| VisiCure - 375 mW/cm² | |
| Power Supply Input | 100-240V AC ≈ 2.5A, 50 to 60 Hz |
| LED Timer | 0 to 999 seconds |
| Timer Resolution | 0.1 seconds |
| LED Activation | Foot pedal, LCD touch screen or PLC |
| Cooling | Air-cooled |
| Dimensions (H x W X D) | Controller: 5.77 x 3.74 x 6.26 in. (14.6 x 9.5 x 15.9 cm) |
| Emitter: 7.9 x 1.97 x 1.97 in. (20.06 x 5 x 5 cm) | |
| Weight | Controller: 2.6 lb. (1.18 kg) |
| Emitter: 1.64 lb. (0.74 kg) | |
| Unit Warranty | 1 year from purchase date |
| Operating Environment | 10 to 40°C, 0 to 80% non-condensing |
| * | Measured using a Dymax ACCU-CAL 50-LED Radiometer. |
- High intensity
- Very high uniformity across the entire cure area over a wide range of working distances
- LED emitters are available in 365, 385 or 405 nm wavelengths
- Admin and production modes
- Touch screen with full keyboard
- MX Series controllers can be utilized to power both MX-250 and MX-150 emitters
- Instant on-off
- Efficient LED temperature management and system monitoring
- Remote I/O interface