Expandable, Portable Hoist

M1 Global Model Microcrane fits through 36 in. doorways, narrow aisles, and inside elevators, yet expands to boom up to a 22 ft. tip height.

The  hydraulic pick & carry portable crane is rated at 2,000 lb. (905kg) (no operator license required) and has a hook height of 20 ft-3 in. (6.1 m). It is only 30 in. (762 mm) wide and weighs 1,800 lb. (816kg) with 300 lb. of removable counterweights to reduce weight while transporting.

The multi-purpose lifting crane has several configurations including a roof top configuration allowing floor to floor or ground to roof lifting of materials of up to 7 stories. Safety features include an upper limit switch (anti-two-block), 1.5 load safety factor, 4:1 rated hook with safety latch, brakes on rear and front wheels, brake on winch, dual stop points on four piece boom and a winch shield.

A small footprint is intentional for transport. But, like a transformer, the machine unfolds from the sides and back for stabilization, and the four piece boom extends to a 22 ft. tip height. Users can easily raise and lower the hydraulic boom with hand controls, and raise or lower live loads with a DC power winch powered by 24v deep cycle battery power with an on-board charger. The line speed is 30 FPM (9m/min.). The M1 Global Model can also be made in stainless steel for clean room environments.