Fast Acting, Safe Powder Coating Stripper Works at Low Temperatures

Description

D-Zolve 917 from Solvent Kleene, Inc. is a fast acting, safe paint and powder coating stripper designed to be used at low temperatures in an immersion tank. D-Zolve’s ability to quickly penetrate and break the chemical bond between the coating’s layers and the substrate eliminates the need for costly, high energy consuming burnoff, blasting or heating of the solution to high temperatures. Designed to minimize health and environmental hazards, D-Zolve 917 is non-flammable, non-toxic, and does not contain any ozone depleting components or carcinogenic compounds. The product is compatible with most ferrous and non-ferrous metals including aluminum, copper, brass, stainless steels, and carbon steels as well as plastic and silicone substrates. D-Zolve 917 penetrates several layers of a paint or powder coating, delaminating these layers from the substrate’s surface. To facilitate the penetration of cross linked coatings, epoxy primers, polyurethane top coats, powder coatings and other difficult to remove coatings, D-Zolve is heated to 135-140°F, compared to other strippers that need to be heated to 200°F. At these lower temperatures, D-Zolve uses less energy helping to minimize energy costs. D-Zolve also helps keep replenishment costs to a minimum. When used in an immersion tank, solids that drop to the bottom of the tank can be filtered out to extend the solution’s useful life. Additionally, D-Zolve can be diluted with water to further reduce costs. D-Zolve 917 is available in either a 5-gallon trial-sized container or a 55-gallon drum.
Be the first to review this product
Add your review:
RELATED STORIES