FSA fixed and FSAD rotating Operator Armchairs with integrated consoles and numerous manual adjustments for the operator.

FSA - Fixed base flip up consoles (shown)
FSAD - Rotating base flip up consoles
LFC - Fixed base fixed consoles

LRC - Rotating base fixed consoles

Commonly used on Cab Operated Cranes, Pulpits, Mining Dredges, Draglines, Drills, and Maintenance of Way Equipment.


  • Ergonomic design, full body contoured seat for operator comfort
  • Independent backrest, seat height, slope, and fore and aft adjustment.
  • Mechanically adjustable lumbar support.
  • Seat cushion tilt and fore/aft adjustments.
  • Dual acting independent seat and console slide system
  • Full hydraulic and spring – dampened mechanical suspension system with “Dial In” weight compensation.
  • Ultra tough nylon velour upholstery.
  • Tilt, vertical and horizontal adjustable armrests.
  • Document pouch.
  • Hinged, tilting consoles
  • Ball bearing rotating base. (FSAD and LRC)
  • Powder coat finish
  • Vinyl upholstery.
  • Adjustable headrest.
  • Mechanical 4-step suspension – 309 lb [140 kg] – 3.2” [80 mm] of height adjustment in 4 increments. (Furnished with 12” wide consoles and larger)
  • Pneumatic suspension.
  • Fixed Base
  • Motorized seat adjustments.
  • Footrest.
  • Wiring and other custom options and accessories available upon request.


FSAD Technical data
 Rotation 270° max. – Stepless friction or pin lock with rotational stops movable every 90°
 Seat slide 16” total adjustment:
  8” seat slide range
  8” seat and console slide range
 Backrest recline 80° in 2° increments
 Seat cushion Depth: 2.4” in 5 increments forward
Tilt: 3-11° in 4 increments
 Suspension Weight: 110 – 287 lb [50 – 130 kg]
Stroke: 3.9” [100 mm]
Height: adjustable 2.4” [60 mm] in 3 increments
 Standard console width 9" standard