Heavy Duty Model 862 Encoder
Description
The newest Leine & Linde heavy duty incremental model 862 encoder boasts a strong resistance to high vibration and shock, and is electrically insulated up to 2.5kV, making it an ideal choice for applications like wind power generation.
Leine & Linde’s heavy, severe duty encoders (distributed exclusively in North America by HEIDENHAIN Corporation) are suited for drive and measurement applications and are often found in industries such as pulp and paper, forest and wood processing, agriculture, aggregate and mining equipment.
Leine & Linde’s new model 862 encoder meets standards according to IEC 68-2-6 and IEC 68-2-27. It comes with short circuit protected outputs, as is the case with all encoders within this 800 series family, including reverse polarity protection as well. It has a relatively low profile at only 67 mm in height and a modest diameter of only 99 mm.
Also available with this encoder is the optional ADS (Advanced Diagnostics System). Simply plug the encoder into a PC via the serial port and information can be downloaded about the encoder itself including data such as the highest temperature reached, hours of operation, etc.
Standard line counts for the 862 include 1000, 1024, 2048, 2500, 3072, 4096 and 5000 with high current HTL and HTL outputs. The hollow shaft is offered with three standard configurations: 12 mm and 16 mm diameters and a 17 mm taper.
Leine & Linde’s heavy, severe duty encoders (distributed exclusively in North America by HEIDENHAIN Corporation) are suited for drive and measurement applications and are often found in industries such as pulp and paper, forest and wood processing, agriculture, aggregate and mining equipment.
Leine & Linde’s new model 862 encoder meets standards according to IEC 68-2-6 and IEC 68-2-27. It comes with short circuit protected outputs, as is the case with all encoders within this 800 series family, including reverse polarity protection as well. It has a relatively low profile at only 67 mm in height and a modest diameter of only 99 mm.
Also available with this encoder is the optional ADS (Advanced Diagnostics System). Simply plug the encoder into a PC via the serial port and information can be downloaded about the encoder itself including data such as the highest temperature reached, hours of operation, etc.
Standard line counts for the 862 include 1000, 1024, 2048, 2500, 3072, 4096 and 5000 with high current HTL and HTL outputs. The hollow shaft is offered with three standard configurations: 12 mm and 16 mm diameters and a 17 mm taper.