High Speed Printer Applicator with Pneumatically Controlled Enclosure


ID Technology has designed and manufactured a high speed printer applicator with a stainless steel enclosure for harsh environments.

This specially designed high speed Model 250 label printer applicator, utilizes a wipe-on applicator assembly to apply labels at a higher throughput than a pneumatic tamp, with greater accuracy. The applicator is capable of applying labels from 2” wide up to 6” wide and from 3” long to 13.25” long without ANY setting changes or changing tools. Large labels are fed easily and without label skew using a reverse fan vacuum rather than a venturi. An optional secondary brush is available, in the same cabinet, to wipe the label down the trailing edge of a product.

The pneumatically controlled hood is raised and lowered by the flip of a lever. During production the hood is raised. For the wash down process the lid is lowered to protect the applicator components. With the stainless cover raised approximately 20”, the print engine, labels, ribbon and controls are readily accessible. Placing the assembly module in the service position enables incredible access to service the print engine or change print heads and platen rollers. Two large service doors are also located at the base of the enclosure.
ID Technology, a division of Pro Mach, is a manufacturer and integrator of labeling, coding and marking systems, as well as, peripheral equipment, supplies and service.
Be the first to review this product
Add your review: