Model 682A09 ICP In-Line 4-20 mA Vibration Transmitter
Description
Model 682A09 ICP In-Line 4-20 mA Vibration Transmitter installs in line with any industrial accelerometer and converts the vibration signal to a 4-20 mA velocity output that can be trended with PLCs, DCSs or SCADA control room systems. Its sleek design installs right into the cable run, no DIN rails, cabinets or special power is required. Customers can take their existing accelerometers and turn them into 24/7 vibration monitoring devices for their most critical machinery.
The 682A09 is a stainless steel, hermetically sealed design capable of operating in the harshest environments with 2-pin MIL connector input and 3-pin MIL connector output. It accepts a 100 mV/g analog signal, converts to 4-20 mA output, and operates off of loop-power supplied by the PLC, DCS or a SCADA system. In addition, the 682A09 outputs the 100 mV/g analog signals via its 3-pin output connector. The analog signal can be run to a central collection point, allowing the user to maintain the FFT capability of the original system.
Specs
PERFORMANCE | |
---|---|
Input Signal (ICP Accelerometer) | 100 mV/g (10.2 mV/(m/s²)) |
Frequency Response (-3dB ±2dB ) | 600 to 60,000 CPM (10 to 1000 Hz) |
Measurement Range | 0.0 to 1.0 in/sec pk (0.0 to 25.4 mm/s pk) |
Output Range | 4 to 20 mA |
Broadband Resolution | 0.01 in/sec pk (0.26 mm/s pk) |
ENVIRONMENTAL | |
Temperature Range | -40 to 185°F (-40 to 85°C) |
Temperature Response (Sensitivity Deviation) | ≤15 % |
ELECTRICAL | |
Excitation Voltage | 20 to 30V DC |
Electrical Isolation (Case) | >100,000,000 Ohm |
Settling Time (within 2% of value) | <60 sec |
Load Resistance | 50 (Vs-20) Ohm |
PHYSICAL | |
Size - Height | 4.0 in. (101.6 mm) |
Size - Diameter | 0.621 in. (15.8 mm) |
Weight | 2.5 oz. (71 gm) |
Housing Material | Stainless Steel |
Electrical Connector (#1 ) | 2-Pin MIL-C-5015 |
Electrical Connection Position (#1 ) | Sensor End |
Electrical Connections (#1 ) (Pin A) | AC IN Pos |
Electrical Connections (#1 ) (Pin B) | AC IN Neg |
Electrical Connector (#2 ) | 3-Pin MIL-C-5015 |
Electrical Connection Position (#2 ) | Output End |
Electrical Connections (#2 ) (Pin A) | 4-20 mA Pos (+) |
Electrical Connections (#2 ) (Pin B) | 4-20 mA Neg & AC OUT Neg |
Electrical Connections (#2 ) (Pin C) | AC OUT Pos |
Sealing | Welded Hermetic |
Downloads
1 User Review
https://chinapcbsmt.com/