INDUSTRIAL PRESSURE-BLAST CABINET
Guyson Corporation offers its Model 10/P cabinet- blast system with direct pressure media delivery and a high-performance media reclaimer for increased productivity in blast cleaning and surface preparation applications that require an expanded finishing enclosure. With interior dimensions of 60 x 60 x 60 inches (1.5 x 1.5 x 1.5 meters), the Model 10/P accommodates large components or bulky fabrications that might otherwise have to be processed in a walk-in blast room. The cabinet has two sets of armholes and is typically supplied with a Lazy Susan turntable to facilitate improved access during blasting operations. Turntables up to 48 inches in diameter are available with a weight capacity from 500 to 2,000 pounds, and a power-jogging table with motorized rotation is also offered. The standard pressure vessel of the Model 10/P holds 1.5 cubic feet (42.5 liters) of shot or grit, and the blast machinery manufacturer normally configures the media delivery system to automatically recharge the vessel whenever the operator's foot is momentarily removed from the actuator pedal. The system can be optionally equipped with a larger pressure pot to enable an extended period of continuous blasting. - MORE - GUYSON INDUSTRIAL PRESSURE-BLAST CABINET A cyclone reclaimer is installed on top of the media delivery stack-up to separate dust and fines from the recirculated blast media. The machine builder claims that its elongated cone design creates a larger dust extraction zone in the cyclone, enabling superior separation, more uniform consistency in the media and less dusty operation of the blast cabinet. The system is completed by an efficient cartridge-type dust collector that is capable of filtering 1,000 cubic feet of air per minute. The dust collector blower generates strong negative pressure in the blasting cabinet to improve visibility, pneumatically conveys media through ducting from the bottom of the blast chamber to the reclamation system and powers the high- performance cyclone separator. When heavy workpieces are to be blast cleaned or finished, the Model 10/P can be supplied with a track extension and roll-out transfer cart that allows unrestricted access for loading by an overhead crane or hoist. The pressure-blast cabinet is compatible with all types of blasting media, including plastic grit, glass bead, aluminum oxide grit and metal shot.