Model 110-T One Conductor, 10 Amp Model 105 One Conductor, 4 Amp
Description
Mounts at the end of a rotating axis.
Mount by the press fit receptacle accessory.
Wires attach using the accessory receptacle and cap.
Mercotac models 110-T & 105 are ideal for shaft grounding applications, including HVAC and VFD motor shaft grounding, thus avoiding very costly bearing damage.
Mount by the press fit receptacle accessory.
Wires attach using the accessory receptacle and cap.
Mercotac models 110-T & 105 are ideal for shaft grounding applications, including HVAC and VFD motor shaft grounding, thus avoiding very costly bearing damage.
Specs
Model No. | Terminals | Voltage AC/DC | Amp Rating @240VAC | Max. Freq. MHz | Contact Resistance | Max. RPM | Temp Max. F (C) / Min. F (C) | Rotation Torque (gm-cm) | Circuit Separation |
110-T | 1 | N/A | 10 | 200 |
| 3600 | 140 (60) /-20(-29) | 35 | N/A | ||
110-TS | 1 | N/A | 10 | 200 |
| 3600 | 140 (60) /-20(-29) | 35 | N/A | ||
110-TL | 1 | N/A | 10 | 200 |
| 1200 | 140 (60) /-20(-29) | 10 | N/A | ||
105 * | 1 | N/A | 4 | 200 |
| 7500 | 212 (100) /45(7) | <10 | N/A | ||
105-SS * | 1 | N/A | 4 | 200 |
| 7500 | 212 (100) /45(7) | <10 | N/A |
"TS" designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)
"TL" designator indicates low torque
"SS" designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)
* indicates high temp. high RPM
Note: The anodized aluminum housing of the 110 & 105series Mercotac is electrically "hot" to the internal conductor.