Model FF Metal Separators Remove Metal Contamination
Eriez Model FF Metal Separators provide protection for extruders, injection molding, blow molding and fine grinding mills. This results in less mold and equipment wear and increases production uptime. Product purity is also improved, which is especially helpful with recycled plastics.
Model FF Separators offer high scanning sensitivity to all metals. When detected, metal contaminants are rejected through the “Quick Flap” reject unit, which can be rotated to match the position of the reject container.
Model FF’s automatic or manual product compensation allows flexible adaption to product conductivity and its enhanced signal-to-noise-ratio minimizes susceptibility to electromagnetic interference and vibration. With its low installation height, the Eriez Model FF Metal Separator can be easily fitted into existing pipeline systems. Model FF Metal Separators are available in eight pipe sizes from approximately 1” to 9.2” in diameter.
- detect all magnetic and non-magnetic metal contamination
- high scanning sensitivity
- available in eight pipe sizes