MX4 iQuad Portable Gas Detector

Description

Industrial Scientific, the global leader in Gas Detection as a Service, introduces the MX4 iQuad™. Able to detect from one to four gases, the MX4 is the latest addition to the company's line of iNet-ready gas detectors. iNet offers an alternative to buying and maintaining gas detectors. It is a software-based service that increases safety by providing visibility into gas detector alarms, exposure and usage. It keeps gas detectors working without costly and time-consuming maintenance. And with iNet, customers do not have to buy the gas detectors. Instead, they subscribe to iNet and receive Gas Detection as a Service. Using the MX4 with iNet is a better way to do gas detection. Subscribers avoid the common problems of owning gas detectors. At the same time, users are protected by the MX4's reliable and user-friendly features. The MX4 is small, rugged and simple to use. A rubber overmold covers its polycarbonate housing to protect the MX4 from high-impact bumps and drops. The housing has also been third-party tested and certified IP66 and IP67. This ingress protection rating indicates that the MX4 is dust-tight and resistant to both water jets and submersion. The MX4 uses a combination of three alarms. Ultra-bright LEDs, a 95 db audible alarm and a powerful vibrating alarm all warn users of hazardous gas levels.

Specs

• Case Material: Polycarbonate w/ protective rubber over mold Dimensions: 103 mm x 68 mm x 30 mm (4.05" x 2.27" x 1.20") with Li-ion Battery Pack Weight: Lithium-ion Battery version = 180 g (6.4 oz) Alkaline Battery version = 193 g (6.8 oz) Operating Temperature Range: -20°C to 50°C (-4°F to 122°F) typical Operating Humidity Range: 15%-95% non-condensing (continuous) typical Display/Readout: Backlit Liquid Crystal Display (LCD) Power Source/Run Time: Li-ion – 12 hours typical @ 20°C Alkaline AAA – 8 hours typical @ 20°C Alarms: Ultra-bright LEDs, loud audible alarm (95 dB at 30 cm), and vibrating alarm Sensors: Combustible gases/methane – Catalytic Diffusion O2, CO, H2S, NO2 – Electrochemical Measuring Ranges: Combustible Gases: 0-100% LEL in 1% increments Methane (CH4): 0-5% of vol. in 0.1% increments Oxygen (O2): 0-30% volume in 0.1% increments Carbon Monoxide (CO): 0-1,000 ppm in 1 ppm increments Hydrogen Sulfide (H2S): 0-500 ppm in 0.1 ppm increments Nitrogen Dioxide (NO2): 0-150 ppm in 0.1 ppm increments Sulfur Dioxide (SO2): 0-150 ppm in 0.1 ppm increments Certifications: UL • Class I, Division 1,  Groups A B C D, T4 • Class II, Groups F G  (Carbonaceous & Grain Dust) • AEx d ia IIC T4 IP66 IP67 • ATEX • Ex d ia I/IIC T4;Equipment  Groups and Category II 2G and I M2 • IP66 IP67
Be the first to review this product
Add your review:
RELATED STORIES