EK9160 IoT Bus Coupler
Description
EK9160 IoT Bus Coupler establishes a direct connection to the cloud without any special control program between EtherCAT I/O and the Internet of Things. As a result, the coupler enables simple and standardized integration of I/O data with cloud-based communication and data services.
It converts the E-bus signal representation to different IoT communication protocols and enables in this way the simple and standardized integration of I/O data into cloud-based communication and data services. Neither a controller nor prior programming is necessary. The I/O data transmission can be parameterized in a user-friendly configuration dialog of the integrated webserver providing access via any browser. The required cloud services and security functions (authentication, encryption, etc.) can also be conveniently configured using a browser. Following parameterization, the coupler autonomously transmits the digital or analog I/O values to the cloud service, including a timestamp.
Specs
| Task within EtherCAT system | Coupling of standard digital and analog EtherCAT Terminals to the IoT world |
|---|---|
| Protocol | MQTT, OPC UA |
| Flash memory | slot for microSD card, 512 MB included |
| Data transfer rates | 100 Mbit/s |
| Configuration | via an integrated webserver |
| Bus interface | 2 RJ45 (switched) |
| Power supply | 24V DC (-15 %/+20 %) |
| Input current | 150 mA + (total E-bus current)/4 |
| Current supply E-bus | 2,000 mA |
| Power contacts | max. 24V DC/max. 10 A |
| Electrical isolation | 500V |
| Dimensions (W x H x D) | 2.8 x 4 x 2.9 in. |
| Operating temperature | -13 to 140°F |
| EMC immunity/emission | EN 61000-6-2/EN 61000-6-4 |
| Relative humidity | 95%, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| Protect. rating/installation pos. | IP20 |
| Approvals/markings | CE, UL |