POLYURETHANE HOSE CUFF SEALS TIGHT USING ORDINARY CLAMPS

Description

A new, factory installed soft cuff for their line of reinforced polyure-thane hoses that provides finished clamping surfaces and eliminates the need for bridge clamps is being introduced. Flexaust Flx-Thane® Polyurethane Hose is reinforced with a bronze coated spring steel wire helix and is now offered with thermally molded, soft polyurethane cuffs that provide smooth clamping surfaces.  Eliminating the need for bridge clamps, these elasticized cuffs are ideal for vapor recovery and dust collection applications requiring a rugged hose that seals tight.

Allowing the use of standard clamps, Flexaust Flx-Thane® Polyurethane Hose can be equipped with thermally molded cuffs in sizes from 2” to 12” I.D.  This highly flexible, compressible, and abrasion-resistant hose comes in two wall thicknesses: MD and SD Series are .030” and the LD is .020” thick. Clear (FDA acceptable), black, and static control versions are available.

Flexaust Flx-Thane® Polyurethane Hose is priced from $ 1.30 per ft. depending upon wall thickness, size, and quantity; offered in cut lengths with two finished ends.  Samples and literature are available upon request.

Specs

• Temperature Range - -65°F to 225°F • Diameter Range (Inches I.D.) - 2.00-12.00 Inch I.D. • Standard Length - 25 & 50 Feet • I.D. Tolerances (Inches) - To 8 Inch -0.00 to +0.125 Inch, 8 Inch and over -0.00 to +0.250 Inch
Be the first to review this product
Add your review:
RELATED STORIES