Portable Place-A-Vent Removes Fumes, Odors and Smoke at their Sources


Place-A-Vent Portable Fume Exhauster, an efficient solution for removing and ventilating fumes produced by welding, brazing, soldering, laser cutting, plasma cutting, and similar operations is announced by Vent-A-Fume/Vent-A-Kiln Corporation, Buffalo, NY.
    The Model PFE, a mobile version of the original, economical wall-mounted Model FE Place-A-Vent, is a complete, self-contained portable unit which can be wheeled into a location where “at-the-source” fume removal is required. The operator simply plugs in to a standard electrical supply, directs the discharge hose to the desired exhaust outlet and adjusts the collection hood to the fume area.
    According to the manufacturer, the Place-A-Vent Model PFE features:
•    a high pressure fan unit fabricated with 14-gauge steel housing and a self-cleaning, cast aluminum radial wheel;
•    25 feet of flexible discharge hose;
•    10 feet of flexible intake hose;
•    a rigid galvanized steel intake hood with a 20-inch long flexible gooseneck arm connected to a magnetic  base for ease in mounting at the fume source.
    The Model PFE is mounted on a rugged 4-wheel dolly which makes it easy to maneuver into the proximity of fume-generating welding and similar operations. The 1/2-HP model (PFE-350) has a standard 4-inch x 8-inch hood and inlet/outlet diameter of 4 inches. The 1-HP model (PFE-750) has a standard 8-inch x 8-inch hood and inlet/outlet diameter of 6 inches.


• Model: PFE-750 • HP: 1 • RPM: 3450 • Ph/Hz/Volts: 1/60/115 • CFM@0.0"w.g.: 750 • Hood Size: 8-in. x 8-in. • Flex Hose (1): 25-ft. & 10-ft. • Inlet/Outlet: 6-in. dia.
Be the first to review this product
Add your review: