Precision Positioning System Provides Fraction-of-a-Millimeter Position Feedback

Description

TWINSBURG, OH – Pepperl+Fuchs introduces the WCS2A/WCS3A PosiTrack™ Position Tracking System. The system brings fraction-of-a-millimeter position feedback to a number of industrial and commercial applications such as overhead monorails, gantry cranes, warehouse automation, galvanizing processes, conveyors, theater lighting and elevators, among others.

PosiTrack consists of three basic components; a U-shaped read head, code rail and support hardware, and network and control interfaces. The read head optically scans a uniquely coded rail to determine a carrier mechanism’s position. An internal microprocessor translates a 48 sender/receiver LED array status into a 19-bit code, providing 0.8 mm positional resolution over travel distances to 1,070 feet. Read heads require no calibration, and sophisticated intelligence provides highly reliable data in challenging conditions. Ultra-forgiving rail/read head alignment tolerances and internal compensation for code rail irregularities maximize system uptime. Detailed system diagnostic codes are continuously provided, so a controller is never more than a few milliseconds away from verifying the system’s health.

The code rail is available in either fiber-laminate or stainless steel materials to satisfy various application conditions, and provides a unique positional code every 0.8 mm of read head travel. Both are sold in customer-specified lengths with continuous strips from 1 to 1,070 feet possible. In addition to providing positional feedback, short code rail lengths can be used for carrier/pallet identification. A single reader can identify and position a carrier, saving the expense of an extra ID system. All rail types can be horizontally curved with no affect on the read head’s accuracy. Fiber-laminate rails can also be flexed for vertical bends.

If the PosiTrack read head’s integral RS-485 or SSI outputs don’t suit ones interface needs, control interfaces are available that convert the RS-485 signals to most standard network protocols including DeviceNet, PROFIBUS DP, CANopen and InterBus. In addition, parallel and SSI interface “booster” controllers are available for extra-long cable runs. Bus-compatible interfaces can control up to four read heads.

Pepperl+Fuchs is a world leader in the design, manufacture and application of high quality factory and process automation products and services. Pepperl+Fuchs pioneered the development of proximity sensors 45 years ago, and has set the standard for innovation and quality ever since.
Be the first to review this product
Add your review: