R Series Slim-Line Dewatering Pumps

Description

R Series Slim-Line Dewatering pumps are ideal for dewatering constructions sites, mines, or for all around use in industrial plants and utilities.

Specs

  • Top Discharge – allows for superior cooling of motor and provides a slim line design.
  • Longer Power Cord – Standard 33-ft power cord on pumps ½ hp and below and 50 ft on pumps 1 hp and above.
  • 304SS Motor Housing – Superior abrasion resistance will not wear out like aluminum motor housings when pumping sandy water.
  • Three Seal Motor Protection - Motor is protected by double mechanical seals. Lower seal made of silicon carbide/silicon carbide and upper seal is made of carbon/ceramic. An additional lip seal has been installed above the impeller to help prevent abrasives such as dirt, silt, or sand from entering into the seal chamber.
  • More Motor Protection – Winding protection and (NEMA) Class F motor insulation allows motor temperature to raise to 230°F, superior to pumps with Class A and B insulation.
  • Automatic switch turns pump motor off if temperature and/or amp draw raises too high. When the motor cools the switch will automatically reset and the pump will turn back on.
  • Tough Pump Construction – Hardened cast iron stands up to rough handling and pumping sandy water unlike pumps with soft resin impellers or plastic exterior components.
Be the first to review this product
Add your review:
RELATED STORIES