Rush Machinery Introduces CNC Carbide Rod Cut-Off Machine

Description

The “Auto-Cut”, a CNC Carbide Rod Cut-Off Machine, can double the production rate for cutting carbide rod when compared with manual cut-off machines. It has easy to use CNC controls with a touch screen operator interface. Parameters can be quickly set for rod diameter and length. The machine automatically loads and cuts rods from a large capacity magazine.

Capacity of the “Auto-Cut” is .055” (1.4mm) to 1-9/16” (40mm) diameter rod, up to 16” long, and comes standard with a flood coolant system.

FOR FURTHER INFORMATION, PLEASE CONTACT:

Ted Hildebrant, Sales Manager

RUSH MACHINERY, INC.

4761 Route 364

Rushville, NY 14544

Tel: 800-929-3070

585-554-3070

Fax: 585-554-4077

Email: [email protected]

Specs

• Materials Cut: Tungsten carbide rod and hardened steel rod • Diameter Capacity: .055” (1.4mm) to 1-9/16” (40mm) • Length Capacity: 1-3/16” (30mm) to 16-5/16” (415mm) • Rod Loading: Automatic (from large magazine) or manual • Spindle Motor: 5.5 HP (4kw) • Flood Coolant System: 17 gallon (65 liter) capacity • Work holding: Twin pneumatic clamps hold rod on both sides of wheel • Work Area Enclosure: Full enclosure with a large viewing window and a provision for mist collector connection • Work Area Lighting: Liquid-proof fluorescent lamp • Control: CNC control with sealed touch panel • Tower Indicating light: Signals machine status to the operator • Wheel Sensor: Detects edge to monitor and automatically compensate for wheel wear • Cut Off Wheel: 8” (200mm) diam., .040” (1mm) wide diamond (carbide) or CBN (HSS) • Overall Dimensions: 75” (190cm) long x 33.5” (85cm) wide x 75” (190cm) high • Net Weight: 1,654 lbs. (750 kg) • Shipping (crated) Weight: 2000 lbs. (910 kg) • Electrical supply voltage: 200-240v, 3-phase, 50/60hz
Be the first to review this product
Add your review: