Series PUX Ultrasonic Flowmeter


The NEW Series PUX Ultrasonic Flowmeter utilizes the transit time difference principle for measuring flow rates through pipes from the outside. This liquid flow meter is compact, portable, and lightweight, incorporating the latest breakthroughs in digital signal processing and electronics. In addition, the Series PUX ultrasonic flow meter realizes high performance and easy operation. One of the most attractive features of these ultrasonic flow meters from the PUX Series is the non-invasive setup, which enables multiple flow measurements of different running systems and offers a significant cost advantage over time.     The Series PUX ultrasonic flow meter may be set up with a wide variety of sensors from small diameters to large diameters, over a wide temperature range. This unit is available with an integrated type graphic printer.


• Service: Homogeneous liquids (water, sea water, oil, and fluid of unknown velocity) capable of ultrasonic wave propagation. • Input: BNC connector, coaxial cable from sensor. • Range: 0 to ±105 fps (0 to ±32 m/s). • Display: LCD, 240 x 320 dot (with back light). • Accuracy: ±1.0% of rate. • Power Requirement: Built in special type Ni-Cad battery (continuous operation time: 5 hours without printer and back light off) (recharging time: 3 hours, power adapter used). • Power Consumption: 12 W or less. • Power Adapter: Special type power adapter 90 to 264 VAC, 47/63Hz. • Power Failure Backup: Memory backup with lithium battery (effective term, 5 years). • Temperature Limits: Ambient 131°F (55°C) without printer; 113°F (45°C) with printer. • Output: 4 to 20 mA DC, 1 point (load resistance, 0 to 1 kohms). • Serial Communications: RS-232C (not isolated), 1 point. • Enclosure Rating: Dust-proof, IP50. • Materials: Plastic case. • Weight: 3.3 lb (1.5 kg) without printer; 4.4 lb (2.0 kg) with printer.
Be the first to review this product
Add your review: