Solenoid Locking Keyed Interlock Switch
Schmersal is proud to announce the AZM300 series, a solenoid locking keyed interlock switch with many unique features. One look at the AZM300 and one cannot help but notice the distinctive external cross shaped cam. This unique design allows the AZM300 to accept the actuator from any of three sides, providing mounting flexibility for either left- or right-hinged doors, or sliding guards. The solenoid locking force of 1,000 N keeps the guard door securely locked until dangerous conditions, which may exist even after removal of power, have abated.
The AZM300 also has integrated a radio frequency identification (RFID) sensor to detect the actuator and indicate a closed guard. This non-contact operating principle limits wear on components, tolerates misalignment, and offers the option of individual coding: The basic version of the sensor responds to any AZM300 target actuator; The “I1” version only accepts the coded ID number of the specific target actuator which is taught in during the first start-up; The “I2” version allows the teach-in process to be repeated, allowing replacement of a lost or damaged actuator.
The AZM300 features the diagnostic advantages of electronic safety sensors. With continuous internal function tests and monitoring of the safety outputs, the AZM300 can be wired in series without detriment to the safety levels. Diagnostic LED’s on the sensor indicate various errors, misalignment and door open/closed signaling. For more advanced indication the AZM300 is also available with serial diagnostics for connection to various PLCs. The AZM300 housing is made of ECOLAB approved materials and is sealed to IP69K standards – a viable solution for use in hygienic or outdoor environments where high temperature and high pressure wash downs are typical. The AZM300 also offers adjustable latching which provides a holding force of 5 or 11 lbs.
The AZM300 actuator includes a dampener pad so that the switch can be used as a door stop for small to medium sized guard doors. Lockout/Tagout can be achieved by placing padlocks through the key of the actuator, preventing the guard to close. The AZM300 series is cULus and CE approved to meet stringent North American and European Standards, and can be used in the highest level of machine safety circuits, PLe to ISO13849-1 and SIL 3 to IEC61508.
- accepts the actuator from any of three sides
- integrated RFID sensor
- electronic safety sensors