Klüberfood 4 NH1-46 Oil
Description
Klüberfood 4 NH1-46 is an NSF H1 registered, fully synthetic hydraulic oil that is approved for use on Husky injection molding equipment.
Compared with mineral hydraulic oils, the NH1-46 reduces contaminant build-up and valve blockages, resulting in longer oil change intervals and lower operating costs in hydraulic systems. Klüberfood 4 NH1-46 provides good oxidation stability and overall stability at extreme temperatures, from -40 to 275°F (-40 to 135°C), and offers protection against friction and wear.
Klüberfood 4 NH1-46 is compatible with all materials that are resistant to mineral oil, including neoprene, NBRE, FPM, PTFE, paints based on acrylic and epoxy resin, nylon (polyamide), and PVC.
Specs
- Fully synthetic base oil to support extended oil change intervals and reduced operating cost in hydraulic systems
- Reduced contaminant build-up and valve blockages compared to mineral hydraulic oils as a result of the improved oil stability
- NSF H1 registered supporting process reliability
NSF-H1 Registration | 137 443 |
---|---|
Lower Service Temp. | -40°F (-40°C) |
Upper Service Temp. | 275°F (135°C) |
Color Space | Yellow |
Appearance | Clear |
Density | 0.83 g/cm3 |
Kinematic Viscosity (104°F) | 46 mm2/s |
Kinematic Viscosity (212°F) | 7.7 mm2/s |
Viscosity Index | >= 120 |
Demulsifying Capacity | 40/37/3 ml |
Foam Test (75.2°F) | <= 150/0 ml |
Foam Test (200.3°F) | <= 75/0 ml |
Flash Point | >= 464°F (240°C) |
Pour Point | <= -49°F (45°C) |
Min. Shelf Life | 60 months |