Twisted Pair IDC Cable

Description

Samtec has introduced its new Twisted Pair IDC Cable Assemblies which provide up to 2.5 times the performance of traditional IDC Flat cable, but at a lower cost than Mid Data Rate Flex and High Data Rate Coax cables.

    The differentially routed assemblies employ 32 AWG 7/40 Tinned, Twisted Pair cable with PVC insulation and Samtec’s high quality, multi-finger .050” (1,27mm) pitch Tiger IDC contact system. This is ideal for high reliability and high mating cycle applications.

    The female assembly (FFTP Series) is double-ended with standard notch polarization and mates with Samtec’s standard .050” (1,27mm) Micro, Shrouded, and Ejector Headers.  The male assembly (FMTP Series) is available double-ended or with a transfer end (socket has notch polarization) and mates with Samtec’s standard .050” (1,27mm) Low Profile and Micro Socket Strips.

    Both assemblies are available in a choice of cable lengths with an optional reverse connector on the second end and are RoHS compliant.

Specs

• Insulator Ma te ri al: PBT • Contact: BeCu • Plating: 10µ" (0,25µm), Au over 50µ" (1,27µm), Ni on contact area; Sn over 50µ' (1,27µm) Ni on balance • Wire: 30 AWG 7/40, Tinned, Twisted Pair with PVC insulator • Current Rating: 0.5A • Operating Temp Range: -40°C to +105°C • Lead Size Accepted: (0,41mm) .016" SQ • Contact Re sis tance: 10 mΩ maximum • Insertion Depth: (2,64mm) .104" to (3,17mm) .125" • Insertion Force: (Single contact only) 5oz (1,39N) avg. • Withdrawal Force: (Single contact only) 3oz (0,83N) avg. • RoHS Compliant: Yes
Be the first to review this product
Add your review:
RELATED STORIES