UV Curable Compound Has Extended Service Capability of -80°F to +300°F


Master Bond UV15-7TK1A is a new one component, high viscosity, optically clear, tough UV curable system developed by Master Bond, Inc., Hackensack, N.J. UV15-7TK1A is designed for bonding, sealing and coating applications.  When exposed to a UV light of appropriate wave length and adequate intensity UV15-7TK1A cures rapidly. Typical cure times range from as little as 5-10 seconds to 1-2 minutes at ambient temperatures.  Commercially marketed 200 watt/inch medium pressure mercury vapor or equivalent UV light sources are recommended.  Maximum UV absorption takes place in the 280-360 nanometer range.
Master Bond UV15-7TK1A is tough durable, non-yellowing and chemically resistant.  It has excellent electrical insulation properties and low shrinkage upon cure.  It bonds well to both similar and dissimilar substrates. UV15-7TK1A will cure in section thicknesses greater than 1/4”.  It has an extended service capability of -80°F to +300°F and is thermal shock resistant.
UV15-7TK1A is fully reactive and does not contain any solvents or other volatiles.  It has a viscosity of a smooth paste.  It is available for use in pint, quart, gallon containers and in syringe applicators.  Its shelf life is 6 months at 75°F in unopened containers.
Be the first to review this product
Add your review: