2200 Series Comes With New Perforated Belt Option for Cooling and Draining Applications


When it comes to versatility — nothing beats Dorner’s 2200 Series Conveyor.
Designed for light- to medium-duty applications, the 2200 Series now comes with a new feature to better accommodate cooling and draining applications — a perforated bedplate.
The 2200 Series with perforated bedplate option is ideal for applications where the product needs to be cooled. Pre-manufactured holes in the bedplate allow air to naturally flow through the frame and bedplate of the conveyor, cooling passing product. The conveyor can also be hooked up to a vacuum to supply additional air through the bedplate.
Another useful feature of the perforated bedplate is that with applications calling for either liquid to be sprayed on passing items or items that are damp from a previous process, the pre-manufactured holes allow moisture to properly drip through the modular plastic belt and bedplate without the worry of collecting inside the frame.     
The perforated bedplate option is available on 2200 Series conveyors with a width of 12 inches or wider.
The low profile 2200 Series is designed to fit in tight spaces and is ideal for applications such as: high performance conveying, streamlined machine interface, small parts transfer, accumulation, high temperatures and sharp parts handing.  
Other features and benefits customers enjoy from the 2200 Series include:
•    Instant belt tensioning
•    V-guide bed plate and belt for positive belt tracking
•    Requires no special tools
•    Load capacity up to 80 pounds
•    Belt speeds up to 276 feet per minute
•    Belt widths between 1.75 and 24 inches
•    Conveyor lengths between 18 inches and 18 feet


# Sealed ball bearings # 1.18” (30) minimum cleat spacing # 2” (51) high cleats, other heights available, contact factory # .59” (15) pitch belt # 2.6” (66) diameter drive pulley # Loads up to 150 lbs. (69 Kg) # Belt speeds up to 150 Ft/min. (46 M/min) # 3” (76) minimum, 23.25” (591) maximum conveyor belt widths # 2’ (610) minimum, 30’ (9,144) maximum conveyor lengths # 12 mm integral drive shaft # Metric fasteners

Be the first to review this product
Add your review: