3100 Series Dock Lifts
Description
With an 8,000 lb. (3,628.7 kg) capacity and only a 10 in. (25.4 cm) lowered height, the 3100 Series Dock Lifts will be available in platform sizes ranging from 6 x 8 ft (1.8 x 2.4 m) up to 8 x 10 ft (2.4 x 3 m). Designed to be a direct replacement for their old 5,000 lb. 10 in. lowered height lifts, these lifts will fit in the same pits.
All models are equipped with a hinged bridge with a pull back chain, and all cylinders are machine grade with clear plastic return lines and internal mechanical stops. Each unit is washed with phosphoric acid, fully primed, and finished with baked enamel. All of the electrical controllers are Underwriters Laboratories approved assemblies, and the units conform to all applicable ANSI codes.
Specs
- All models are equipped with a hinged bridge with a pull back chain
- All of the electrical controllers are Underwriters Laboratories approved assemblies
- Each unit is washed with phosphoric acid, fully primed, and then finished with baked enamel
- All cylinders are machine grade with clear plastic return lines & internal mechanical stops
- These units conform to all applicable ANSI codes