3563 Analysis Vibration Sensor System
Description
The 3563 Analysis Vibration Sensor system is a complete solution—hardware, software, and services—that integrates a powerful set of technologies to give maintenance teams detailed insights into anything from performance tracking to fault analysis to improve the reliability of equipment.
The 3563 combines a high-frequency piezoelectric sensor, two MEMS sensors, and software, enabling maintenance teams to continuously monitor and analyze vibration readings for a facility’s critical and semi-critical assets. Its smart battery management allows for a user-determined data transmission rate and helps users adapt and extend the sensor’s battery life while still capturing the data required.
When you purchase the Fluke 3563, you get 1-on-1 setup assistance from Fluke Reliability experts, ensuring successful configuration, commissioning, and installation process. Vibration training options are also available.
Specs
Data Transmission | |
---|---|
Transmission Interval | Configurable, minimum default is every 10 minutes |
Range | |
Frequency Range | 2 to 10,000 Hz Z (0 to 1,000 Hz X, Y) |
Amplitude Range | z-axis: +/- 50g; x- and y-axis: +/- 16g |
Sampling Frequency | 18.5 to 62.5 kHz |
Temperature | |
Measurement Range | -4° to 185°F (-20° to 85°C) |
Storage Range | |
Mechanical | |
Size (D x H) | 2.6 x 2.1 in. (68 x 53.4 mm) |
Weight | 199.5 g (145 g without batteries) |
Ingress Protection Class | IP67 |
Shock Limit | 5,000 g peak |
Power | 6 x 3.6V 1/2 AA Li-SOCl 2 battery Battery lifetime: At least 1 year (Every 10 minutes overalls / Every 60 minutes 2 sec. TWF) |
AD Conversion | 24 bit |
Wireless Communication (Sensor to Gateway) | |
Radio Frequency | 2.4 GHz ISM band according to IEEE 802.15.1 |
Range (Line of Sight) | Up to 328 ft (100 m), depending on the environment |
- Long Battery Life: The piezo sensor and software combine to produce a unique, smart battery management capability with a user-determined data transmission rate. Users can adjust and extend the sensor battery life while still getting the necessary data.
- User-Friendly Interface: Users can configure the sensor based on machine type for precise readings without manually entering severity thresholds.
- Powerful Analysis: The Live-Asset Portal software application enables users to analyze both banded overall values and narrowband values. With this capability, they can determine the fault causing a problem.
- Flexible Wireless Network Capabilities: The wireless gateway possesses dual network connection capabilities—Wi-Fi and Ethernet—so the system can fit any facility.
- Expert Services: remote and onsite setup, vibration training, and custom installation and training packages.