48 I/O Port Miniature Web Server allows Remote I/O and servicing.
Description
The 2.8” x 2” PicoServ HDI also implements an IEE 488.2, SCPI over IP/UDP protocol for reading and setting the digital I/O ports and other system parameters from applications other than a web browser. The IEE 488/SCPI command structure makes integration of PicoServ HDI into test and measurement environments particularly straight forward. A set of standard web pages are pre-loaded allowing control of the I/O ports “out of the box”, but these may be supplemented or replaced by customer written web pages by using the utilities provided. The TTL level ports have a 50mA sink/source drive capability per output and a maximum drive of 600mA per module.
The EEPROM file storage area can support almost any type of file including HTML, GIF, JPEG, and JAVA, and means that only standard web authoring techniques are required to provide an eloquent and professional browser based interface for almost any system.Specs
• 10baseT Ethernet- RJ45 connector • RS232Serial host interface - Used for parameter and data exchange between host system and PicoServ server. • Format - 8 data bits, no parity. • Baud rates - 2400, 4800, 9600, 19200, 38400,76800, 102400bps. • Addresses - up to 8 logical host addresses supported. • Connector - 14 pin 0.1” male header. • C Serial bus interface - Used for parameter and data exchange between PicoServ expansion I/0 • Specification - Conforms to Philips I-C bus specification. • Speed - 750Kbps. • Type - 256K byte EEPROM. • User file capacity - 260,096 bytes. • Max file size - 61,440 bytes. • Max file size - (HTML files) 59,322 bytes. • Max number of files - 64 • Max filename length - 25 characters including extension. • Up-loadable - via TFTP. • Power requirements - 6-24 VDC, 40mA. • Power consumption - 280mW. • Operating Temperature - 0 - +70 C. • Storage Temperature - -40 - +100oC. • Humidity - 0-95% non-condensing. • Dimensions - 70mm x 50mm x 16mm (2.75" x 2" x .625")