Clamp-On Power Meter Model 205


True RMS Clamp-On Meter Model 205 is safety-rated at 600V CAT IV. They measure AC and DC volts and amps, frequency, continuity, and resistance and can also perform diode checks. Model 205 also measures Power and Power Factor, phase rotation, and THD.


The Model 205 also keeps track of peak + and peak values. These meters are rugged enough for the most demanding work environments and their IP54 rating allows them to withstand both dust and water spray. Function selection can easily be performed with one hand, even with a glove on.


Voltage Range:1000Vrms AC/DC/AC+DC Auto-ranging
Resolution Max:0.01V
Current Range:600Arms AC, 900ADC
Resolution Max:0.01A
Accuracy V Typical:1% ± 3cts
Accuracy A Typical:1% ± 3cts
InRush:6 to 600AAC, 6 to 900ADC
Power Measurement Max:600kW AC, 900kW DC
THD:Yes, %f and %r
Continuity:Selectable from 0 to 599.9Ω
Diode Test:0 to 3.2VDC
Frequency:20kHz in V, 3kHz in A
Power Factor:Yes
Phase Order:Yes
Power Source:1 x 9V, IEC LF22
Battery Life:>120 hours
Dimensions:8.7 x 3.0 x 1.65 in. (222 x 78 x 42mm)
Weight:12.0 oz. (340g) with battery
Jaw Opening:1.34 in. (34mm)
Operating Temperature:-4 to +131°F (-20 to +55°C)
Storage Temperature:-40 to +158°F (-40 to +70°C)
Operating Humidity:90% up to 131°F (55°C)
Pollution Degree:2
Ingress Protection:IP40
Safety Compliance:EN/IEC 61010-1: 1000V CAT III, 600V CAT IV
EN/IEC 61010-2-030:2010
EN/IEC 61010-032:2002
Be the first to review this product
Add your review: