Clamp-On Power Meter Model 205
Description
True RMS Clamp-On Meter Model 205 is safety-rated at 600V CAT IV. They measure AC and DC volts and amps, frequency, continuity, and resistance and can also perform diode checks. Model 205 also measures Power and Power Factor, phase rotation, and THD.
The Model 205 also keeps track of peak + and peak values. These meters are rugged enough for the most demanding work environments and their IP54 rating allows them to withstand both dust and water spray. Function selection can easily be performed with one hand, even with a glove on.
Specs
| Voltage Range: | 1000Vrms AC/DC/AC+DC Auto-ranging |
|---|---|
| Resolution Max: | 0.01V |
| Current Range: | 600Arms AC, 900ADC |
| Resolution Max: | 0.01A |
| Accuracy V Typical: | 1% ± 3cts |
| Accuracy A Typical: | 1% ± 3cts |
| InRush: | 6 to 600AAC, 6 to 900ADC |
| Power Measurement Max: | 600kW AC, 900kW DC |
| THD: | Yes, %f and %r |
| Continuity: | Selectable from 0 to 599.9Ω |
| Resistance: | 60kΩ |
| Diode Test: | 0 to 3.2VDC |
| Frequency: | 20kHz in V, 3kHz in A |
| Power Factor: | Yes |
| Phase Order: | Yes |
| MIN/MAX/PEAK-/PEAK+ | Yes |
| ∆REL: | Yes |
| Power Source: | 1 x 9V, IEC LF22 |
| Battery Life: | >120 hours |
| Dimensions: | 8.7 x 3.0 x 1.65 in. (222 x 78 x 42mm) |
| Weight: | 12.0 oz. (340g) with battery |
| Jaw Opening: | 1.34 in. (34mm) |
| Operating Temperature: | -4 to +131°F (-20 to +55°C) |
| Storage Temperature: | -40 to +158°F (-40 to +70°C) |
| Operating Humidity: | 90% up to 131°F (55°C) |
| Pollution Degree: | 2 |
| Ingress Protection: | IP40 |
| EMC: | EN61326-1 |
| Safety Compliance: | EN/IEC 61010-1: 1000V CAT III, 600V CAT IV EN/IEC 61010-2-030:2010 EN/IEC 61010-032:2002 |