DPG-plus 40 - New small Sealed 2-Finger Parallel Gripper
Description
SCHUNK introduces additional sizes of its sealed 2-finger parallel grippers, DPG-plus. The DPG-plus size 40 is designed for the automated handling of small components under extreme environmental conditions. This sealed 2-finger gripper offers protection of IP67 against the penetration of contaminants and is therefore ideally suited to handle rough and dirty workpieces. Even for under-water applications or in environments with abrasive dust, its protection is assured.
The DPG-plus 40 offers serrated guidance for increased moment and longer finger capabilities. The drive concept has been adapted from the known PGN-plus series using an oval piston and a wedge-hook drive for the base jaw. The oval piston which transfers the actuation to the jaws through the proven wedge-hook system generates a considerably higher grip force than a round piston. For the DPG-plus 40, this results in gripping forces of up to 110 N.
A direct air supply is also possible without hoses, and the DPG-plus 40 can be flexibly attached on two sides in three screw-directions.
Specs
• Stroke per jaw mm [in] : 14.0 [0.551] • Opening force N [lbf] : 6230.0 [1401] • Min. spring force N [lbf] : 1520.0 [342] • Weight kg [lbs] : 9.5 [20.94] • Recommended workpiece weightkg [lbs] : 22.1 [48.72] • Air consumption per double strokecm3[in3] : 635.0 [38.75] • Minimum pressure bar [psi] : 4.0 [58] • Maximum pressure bar [psi] : 6.5 [94] • Nominal operating pressurebar [psi] : 6.0 [87] • Closing time s : 0.8 • Opening time s : 0.4 • Max. permitted finger lengthmm [in] : 125.0 [4.921] • Max. permitted weight per fingerkg [lbs] : 5.5 [12.13] • IP rating : 67 • Min. ambient temperature°C [°F] : -10.0 [14] • Max. ambient temperature°C [°F] : 90.0 [194] • Repeat accuracy mm [in] : 0.02 [0.0008]