EoSens 4FIBER Camera


The EoSens 4FIBER camera is a fanless high-speed camera that delivers 4 mp resolution, 2336 x 1728 pixels at 563 fps over unprecedented distances via its MTP fiber camera-to-computer interface.


The camera expands the horizons of inspection systems that have traditionally been limited to copper cable's short lengths—typically a few feet or less—to nearly 1,000 ft (300 m). Copper cables are rapidly approaching speed and distance limits due to the laws of physics, leaving fiber as the only alternative for long-distance, high-bandwidth imaging applications. When compared to copper cabling, fiber has very low attenuation loss over long distances resulting in virtually no signal strength loss, and it is immune to electromagnetic energy.


Long-distance, high throughput transmission length makes the EoSens 4FIBER ideal for such applications as robot positioning, ballistics and explosives, rail inspection, and recycling sorting, among others. High-speed inspection tasks also benefit from the camera's extremely fast frame rates which can be accelerated by defining up to three independent regions of interest. Frame rates up to 225,000 fps are possible at a lower resolution.


Contained within a 3 x 3 x 2 in. (80 x 80 x 53 mm) metal housing, the compact EoSens 4FIBER is simple to install in space-sensitive areas. It features an Alexma AM41 high-sensitivity CMOS sensor and a full range of performance capabilities including gamma and FPN correction, noise reduction, skipping mode, and sequencer.


 Resolution 4 mp, 2336 x 1728 px
 Frame Rate 563 fps
 Chroma Mono
 Interface CXP-6 with 4 Connections
 Sensor AM41
 Manufacturer Alexima
 Sensor Type Area CMOS
 Shutter Type Global shutter
 Sensor Size 0.6 x 0.5 in. (16 x 12 mm)
 Optical Diagonal 0.8 in. (20 mm)
 Sensor Format 4/3 in.
 Pixel Size 7 x 7 µm (0.0003 x 0.0003 in.)
Frame Rates
 2336 x 1920 563 fps
 1920 x 1080 900 fps
 1024 x 768 1264 fps
 640 x 480 2020 fps
 128 x 128 7492 fps
 Exposure Modes External
 Trigger Modes Button, External TTL Signal, CXP-Trigger
 Exposure Time 1 µs to 1 sec (external∞)
 Pixel Format mono8, mono10/10 bit
Feature Set
 AOI Yes
 Shading correction
 Defect pixel correction
 Lens Mount C-Mount
 Dimensions (W x H x D) 3 x 3 x 2 in. (80 x 80 x 60 mm)
 Weight 1 lb. (500 g)
 Ambient temperature 14 to 113°F (-10 to 45°C)
 Ambient humidity 10 to 90% (non-condensing)
 Shock/Vibration 70 g/7 grms
 Protection Class IP30
 Input up to 24V 2x
 Input Galvanic
 Output Galvanic
 Power Supply 12 to 24V DC
 Power Consumption 10 W
Be the first to review this product
Add your review: