Float Level Switch For Polluted And Other Media

Description

Ideally suited for potable water, polluted media, and other fluids, FS00Z Float Level Switches consist of a polypropylene housing with an integrated watertight and position dependent electromechanical micro switch. The unit works according to the lift principle. The hollow float is raised (lowered) by the rising (falling) liquid until it reaches an angle of 45° from horizontal when switching takes place. The mercury free float switch can be mounted to the tank/container via a through hole such as a 1/2“ cable gland from the tank top. The switch point is defined by manipulating placement of a supplied ballast weight on the connecting cable or by inserting cable through a tube of desired length. The FS00Z Level Switch is suitable for level monitoring of compatible liquids and, due to the high contact rating of 10 (8) Amps, 250V, for direct pump control.

Specs

• Operating temperature: max. 140 °F / 60 °C, with LAPP- • Therm cable up to 200 °F / 95 °C • Storage temperature: max. 200 °F / 95 °C • max. pressure: 29 psi / 2 bar • Switching angle: +/- 45° • Electrical protection: IP68 • Weight: • Float: 0.24 lbs / 110 g • Ballast: approx. 1.54 lbs / 700 g
Be the first to review this product
Add your review: