Front Apply Label Printer/Applicator - Tharo Systems Inc


Tharo Systems, Inc. introduces the PA1200fa Front Apply Label Printer/Applicator.  This Printer/Applicator can print and apply labels to the leading side of a product moving down a conveyor.  The PA1200fa was designed, engineered and built by Tharo Systems and is currently available using the Tharo H-Series direct  thermal or thermal transfer printers with print resolutions of 203 or 300 dpi.
After a label is printed, it is stripped from the liner and held by suction on the applicator tamp pad.  The tamp pad is mounted on a heavy-duty swing arm that extends over a conveyor and tamps the label to the product.  Labels can be as small as 3” x 1” and up to 4.5” x 8”.


• Minimum Label Size: 3" x 1 " (76.2mm x 25.4mm) • Maximum Label Size: 4.5" x 8.0" (114mm x 203mm) • Placement Accuracy: Stationary: +/- 0.01" (.25mm) or Moving: +/-0.125" (3mm) (for example: conveyor belt applications) • Speed: Up to 20 products per minute* • Weight of Applicator: 37 lbs (17kg) • Weight of Stand: 120 lbs (55kg) • Swing Length: 26" (660.4mm) • Air Requirement: 75 to 90 psi (5 to 6 bar) • Printer Type: Tharo H-Series Direct Thermal or Thermal Transfer Printer • Power Source: Switchable: 100V 60Hz or 230V 50Hz • Environmental: Temp 50-95°F (10-35°C) at 10-85% humidity • Standards: Built to CE safety and emissions standards. RoHS compliant upon request.
Be the first to review this product
Add your review: