High-Performance Acrylic Adhesive Holds to Wood, Painted Surfaces and Plastics
Description
Pres-On, a leading manufacturer of industrial tapes and gaskets, is now offering a new "free film" acrylic adhesive for OEM's who require the immediate adhesion of materials during assembly, including difficult to attach woods, foams, fabric, painted surfaces, and plastics.
New Pres-On FFVSA-5 acrylic adhesive exhibits very high ultimate adhesion properties and holding power, along with excellent environmental resistance and aging properties. Measuring only .005 inch thick, it will not cause unsightly gaps between materials in the assembled product. It also represents a cleaner, easier-to-apply alternative to messy glues while delivering superior reliability.
Pres-On FFVSA-5 is available in lengths of 180 yards for longer production runs, as well as widths of 3/16-inch to 54 inches.
Specs
• Adhesion to Steel @ 72°F
• Steel immediate3.5 lbs/in width or foam tear
• Steel after 24 hrs7.0 lbs/in width or foam tear
• Polystyrene immediate5.0 lbs/in width or foam tear
• Polystyrene after 24 hrs7.0 lbs/in width or foam tear
• Powder paint immediate3.5 lbs/in width or foam tear
• Powder paint after 24 hrs7.0 lbs/in width or foam tear
• Shear @ 72°F, 1” x 1”, 500 gmsindefinite
• Shear @ 72°F, 1” x 1”, 1000 gms200 hours minimum
• UV ResistanceExcellent
• Optimal Application Temperature45°F to 80°F
• Service Temperature-20°F to 200°F
• Water and Humidity ResistanceExcellent
• Shelf Life1 year stored at room temperature