T-Series High-Performance Liquid Pumps

Description

Engineered to provide an extremely safe, reliable, and durable hydraulic power source for applications up to 68,000 psi (4,690 bar), the T-Series pneumatically-operated liquid pumps address many of the shortcomings commonly found in today’s air-driven liquid pumps. The premium pumps are built to run at their maximum rated pressure and feature a robust motor and seal design that delivers a long service life. In addition, these pumps do not require a lubricated air source.

 

HiP T-Series pumps achieve a “bubble tight” pressure stall that can be used for high-pressure applications such as bolt tensioning, pressure testing, power pressing, jacking, lifting, hydraulic power units, proof testing components, and valve actuation, and many more.

 

The T6000 series of pumps has a 6-in. air cylinder and a maximum operating pressure of 58,000 psi (4000 bar), while T7500 series pumps have a 7.5-in. air cylinder and a maximum operating pressure of 68,000 psi (4,690 bar). Both pump series is available in nine different pump ratios and four different plunger seal materials, and have a 2.5-in. pump stroke with a maximum flow rate of 177 in3/min (2.9 lpm) at 80 CPM air drive pressure.

 

The T-Series pump features the Merkur air motor from Graco. With leading technology in air motor design, it has a proven 10-year record of performance. Merkur air motors deliver increased efficiency through their low air consumption and use a heavy-duty muffler to provide low operating sound levels without the need for additional mufflers.

 

T-Series pumps are designed for heavy-duty operation and built for the most demanding applications. These pumps can achieve their maximum working pressure time and time again unlike intermittent duty-rated pumps. A severe duty plunger seal provides for less downtime and the separated pump air section helps prevent fluid leaks into the air motor.

 

This pump family incorporates several features that make it particularly easy to service and to help minimize downtime. The Merkur air motor has external valve access to allow the shuttle valve to be serviced without disassembling the pump. There is quick and easy access to plunger seals and the pump assembly uses a retaining ring that allows for 360-deg. rotation for easy installation and service.

Specs

  • 6-in. air cylinder
  • Available in 9 different pump ratios
  • 2.5-in. pump stroke
  • Maximum operating pressure of 58,000 psi (4,000 bar)
  • Maximum flow rate of 177 in3/min (2.9 lpm) at 80 CPM
  • Inlet air pressure 15 psi to 100 psi (1 to 7 bar)
  • Four different plunger seal materials
Be the first to review this product
Add your review: