High-Performance Solenoid Valve
Description
The high-performance Wattimizer series solenoid valves are now available with a plastic body ideal for air, gas, and corrosive media. For many applications, plastic valve bodies offer significant value over metal-based bodies as they’re lightweight, corrosion-resistant, offer a lower profile, and use convenient push-to-connect fittings—all at a lower cost. These plastic bodies are CUL recognized.
The plastic valve body is approximately 1-in. in diameter, comes with an integral 1/4-in. OD tube "push-to-connect" port fittings and has a maximum pressure rating of 125 psig at room temperature. Plastic bodies and manifolds are designed for medical, beverage, appliance, fluid power, automotive, gas, and more; and can be used in direct acting and pilot applications.
The Wattmizer is a highly efficient, miniature electric 12V solenoid valve designed for use in compact areas requiring low power draw. These 2 and 3-way solenoid valves are offered in a range of .65 to 9 watts of continuous power, with operating pressure capacities of up to 1,200 psi (85 bar) with machined metal bodies. Note, plastic valve bodies are limited to low-pressure applications up to 125 psi.
Specs
Body | 1-in. Stainless Steel, Plastic or Brass (standard) |
---|---|
Maximum Operating Pressure Differential | up to 1,200psi (85 bar) |
Orifice Diameters | .025 to 1/8 in. (body) |
.025 to 5/64 in. (stop) | |
Response Time | 6 to 10 milliseconds |
Coil Type | Continuous Rating |
0.65 watt through 9 watt-Class "F" (155°C) standard | |
0.65 watt through 9 watt-Class "B" (130°C) optional | |
Standard Voltages | 24V/50-60 Hz, 120V/50-60 Hz, 240V/50-60 Hz, 6,12, 24 VDC (Other voltages and wattages available upon request) |
Power Consumption | 0.65 to 9 watt continuous duty |
Vacuum | 5 microns |
Port Size | #10-32 UNF-2B, 1/8" NPT |
Housing | Strap housing (standard) |
Grommet Housing (optional) | |
Seal Material | Buna N, Viton, EPDM standard, others optional |
Leakage | Bubble tight (1 x 10-5 cc/sec.) |
Media Temperature Limitations | Minimum: -40°F (-40°C) |
Maximum: +180°F (+82°C) | |
Weight | 2 3/4 to 3 1/4 ounces |
Lead Wire | 20 AWG, 18 in. (standard) |