BlueWave QX4 Spot-Curing System
Description
BlueWave QX4 high-intensity spot-curing system features all the benefits of LED-curing technology in a small and versatile unit. The system is comprised of a controller and up to four LED heads which are available in 365, 385, and 405 nm and can be outfitted with 3, 5 or 8-mm diameter focusing lenses.
The LED heads and focusing lenses can be used in any combination and can be controlled through the system’s variable mode, a feature that allows each head to be individually programmed for intensity and cycle times. Individual exposure times and intensity settings can be set in 1% increments for each LED head, giving users maximum curing flexibility.
In addition to its curing versatility, the BlueWave QX4 also features an easy-to-use control interface that facilities flexibility in setup and use of the unit. The unit can be activated by a foot pedal or PLC interface, allowing it to be easily incorporated into automated systems.
Specs
Output frequency | RediCure: 365 nm |
---|---|
PrimeCure: 385 nm | |
VisiCure: 405 nm | |
Intensity output | RediCure: 13.9 W/cm² |
PrimeCure: 18.8 W/cm² | |
VisiCure: 14.9 W/cm² | |
Power supply input | 100 to 240V ~2 A, 50/60 Hz |
LED timer | 0.1 to 999 seconds |
LED activation | Footswitch, front panel, or PLC |
Cooling | Natural convection |
Dimensions (W x D x H) | 3.5 x 5.5 x 5.6 in. (9.0 x 14.1 x 13.7 cm) |
Weight | Controller: 2.3 lb. (1.03 kg) |
Head: 0.2 lb. (0.08 kg) | |
Unit warranty | 1 year from purchase date |
Operating environment | 5 to 40°C (41 to 104°F), non-condensing |
- One controller controls up to four LED heads for maximum application flexibility
- LED heads for 365, 385 or 405 nm wavelengths for better compatibility with different light-curable materials
- Variable mode allows each LED head to be programmed independently
- Individual exposure times and intensity settings available in 1% increments for each LED head allows for maximum curing flexibility
- Interchangeable/replaceable focusing lenses in 3, 5, and 8-mm diameters that allow tailoring of the unit to your curing requirements
- Instant on-off – no warm-up period and more energy efficient
- Efficient LED temperature management for continuous operation without overheating and comfortable hand-held operating temperature
- PLC interface that easily incorporated into automated systems