BlueWave MX-150 LED Spot-Curing System
Description
BlueWave MX-150 is a unique, smaller LED spot-curing system with unique curing flexibility. The system can be used as a bench-top unit or integrated into an automated system, and its LED emitters are available in 365, 385 or 405-nm wavelengths. In addition to providing great curing flexibility, the BlueWave MX-150 is also designed to offer higher, more consistent curing intensities than traditional spot-curing systems.
Specs
Output frequency | RediCure: 365 nm |
---|---|
PrimeCure: 385 nm | |
VisiCure: 405 nm | |
Intensity output* | RediCure: 24 W/cm² |
PrimeCure: 38 W/cm² | |
VisiCure: 36 W/cm² | |
Power supply input | 100-240V≈ 2.5A, 50-60Hz |
LED timer | 0 to 999 seconds |
LED activation | Foot pedal, LCD touch screen, or PLC |
Cooling | Air Cooled |
Dimensions (W x D x H) | Controller: 5.14 x 7.19 x 7.35 in. (13.1 x 18.3 x 18.7 cm) |
Emitter: 7.9 x 1.97 x 1.97 in. (20.06 x 5 x 5 cm) | |
Weight | Controller: 2.6 lb. (1.18 kg) / Emitter: 1.4 lb. (0.64 kg) |
Unit warranty | 1 year from purchase date |
Operating environment | 10 to 40°C, 0 to 80% non-condensing |
* | Measured using a Dymax ACCU-CAL 50-LED Radiometer at a distance of 0 mm. |
- High Intensity of up to 40 W/cm²
- Quickly cures a variety of materials
- LED emitters for 365, 385 or 405 nm wavelengths
- Cures LED-optimized and UV/Visible-light curable materials
- Wavelength flexibility allows co-optimization of adhesive and cure system for optimal cure
- LED chip located in the emitter, not the controller
- Consistent intensity
- Mounted emitter saves the cost of lightguides
- Eliminates potential intensity loss from long or bent lightguides
- Easily mounted to robotic arms with no intensity variation
- Emitter can be mounted closer to application, while the controller remains close to the operator
- Admin and production sides
- Production mode for simple on/off operation
- Curing programs can be easily entered, stored, and recalled when needed
- Units can be password protected so only the Production Mode can be accessed by workers
- Touch screen with full keyboard
- Improved user interface
- Compatible with 3 and 5-mm lightguides with Wolf Connector
- Utilizes standard/readily available lightguides
- Instant on/off
- No warm-up period
- More energy efficient
- Efficient LED temperature management and system monitoring
- Maximized continuous operation without overheating
- Comfortable hand-held operating temperature
- Temperature monitoring assures maximum LED life
- Checks presence of lightguide or other delivery optic
- PLC interface for easy inclusion in automated systems