Linear Potentiometers Offer Cost-Effective Solution to Sensing Requirements
Description
LP-22 Series of linear potentiometers offers a cost-effective solution to sensing requirements in the factory automation marketplace.
They are expertly constructed to satisfy applications such as robotic control, X-Y table feedback, injection molding machine slides, press or die arm position, control valve shaft position, and mil/aero test stands.
The ruggedly constructed 22-mm OD anodized aluminum housing with a 1-m 3-conductor cable keeps out dust and permits the potentiometer to withstand high shocks (50 gs single hit) and vibration (20 gs). Swivel rod eye ends are standard to facilitate self-alignment during installation. Depending on range, LP-22 Series is powered with a maximum input of between 12 and 36 v dc at 12 ma or less, and their maximum output resistance varies between 1 and 5 kilohms.
Specs
Features of the LP-22:
- Full ranges from 25 to 300 mm (1-12 in.)
- Self-aligning swivel rod eyes on both ends
- Environmentally sealed to IEC IP-64
- Operating temperature –40 to 150°C
- Linearity better than 0.10%