Loctite EA 3501 HT Sealant

Designed to prohibit liquids, solids, and gases from entering through gaps and voids in metal seams, Loctite EA 3501 HT is a one-part, heat-cure epoxy seam sealant that offers excellent adhesion to primed or bare, oily metals. This grey sealant maintains its flexibility, adhesion, and color after exposure to paint bake processes up to 437°F (225°C), and is ideal for use on a range of outdoor power and heavy equipment vehicles.

Compatible with many metal pre-treatment processes, as well as e-coat primer/paint and powder top-coat processes, Loctite EA 3501 HT can be easily pump-applied without preheating and smoothed in place with ease. This epoxy provides a tough, flexible bond on metal seams between welded or bonded joints, butt joints, and other visible seams to prevent rust and corrosion. Suitable substrate gauges range from thin sheet metals to rigid castings and extrusions.

Composed of 100% solids, Loctite EA 3501 HT is a grey paste in both its uncured and cured states. The epoxy cures on exposure to 320ºF (160ºC) heat for approximately 30 minutes. It will not sag horizontally or vertically at elevated temperatures and offers Shore A hardness of 65 to 85. On both mild and oily steel, the sealant achieves cohesive failure in peel or shear force modes.