Low-cost Powerhouse: Ø22mm Lo-cog DC Micromotor with Graphite Commutation
Description
Micro-Drives announces the expansion of its DC Micromotor product line with the addition of its Series M2232U. The lo-cog DC micromotor has an external motor-diameter of 22 mm and a length of 32 mm. The lo-cog rotation is achieved through a combination of skewed laminations and a tapered permanent magnet system. The DC micromotor can achieve a stall torque of 25.62 mNM and speeds of up to 10,000 rpm. The DC micromotor comes in 2 different versions each with graphite commutation which ensures long-life even under overload conditions. The Series M2232U..GS has a cantilevered brush system while the Series M2232U..CS has a cartridge brush system for even longer life applications. The 2.0 mm diameter motor shaft ensures high rotational stability.
The Series 2232U DC Micromotor can be combined with a gearhead, encoder, and linear actuator for a complete miniature DC drive system. Plastic and metal planetary gearheads are available in 22 mm diameter with various reduction ratios allowing an output torque up to 600 mNm. The 2 channel magnetic encoders allow for precise control of speed and direction of rotation as well as the positioning of the drive shaft.
Series M2232U motors with 6, 12, and 24 volt windings are immediately available from stock with a 24 - 48 hour turnaround.
The Series 2232U DC Micromotor can be combined with a gearhead, encoder, and linear actuator for a complete miniature DC drive system. Plastic and metal planetary gearheads are available in 22 mm diameter with various reduction ratios allowing an output torque up to 600 mNm. The 2 channel magnetic encoders allow for precise control of speed and direction of rotation as well as the positioning of the drive shaft.
Series M2232U motors with 6, 12, and 24 volt windings are immediately available from stock with a 24 - 48 hour turnaround.