EP39-2 Two-Component, Low-Viscosity Epoxy

Master Bond Polymer System EP39-2 is a fast curing, low viscosity, optically clear two-component epoxy system for high-performance bonding, sealing, coating, and casting. It is 100% reactive and does not contain any diluents, solvents or other volatiles. The mix ratio is a convenient 2 to 1 by weight. EP39-2 is a very fast curing, even in very thin sections. Films as thin as 5 mil become tack-free at ambient temperatures in only 3 hours and fully cure in 6-10 hours. The aforementioned film will even become tack-free at 40°F within 9 hours. Other desirable characteristics include resistance to blushing and exudation, good electrical insulation properties, high toughness, superior wear resistance, and outstanding chemical resistance (see chart below). The service temperature range is -60 to 300°F. 

Master Bond Polymer System EP39-2 is an exceptionally versatile system. Its marvelous optical clarity and light transmission properties make it an excellent candidate for many optical and fiber-optic applications including bonding, sealing, coating, and casting. EP39-2 bonds well to a wide variety of substrates including most metals, glass, and plastics and is easy to apply by roller, brush or conventional spray equipment.