M-Series Electromagnetic Flow Meters (M2000 & M5000)


Part of the M-Series Mag Meters, the M-5000 and M-2000 Mag Meters deliver precise and timely flow measurement information with minimum maintenance requirements.


The M-5000 Mag Meter is a battery-operated, general-purpose detection mag meter in a stand-alone package. Suitable for a wide range of utility and industrial applications, the M-5000 is ideal for remote settings and other applications without access to power. It can be used to measure well water, wastewater, reclaimed water, and bi-directional flow applications that have minimal electrical conductivity. Whether the fluid is water, highly corrosive or requires special handling, this meter can accurately measure flow.

As a battery-driven solution, the M-5000 allows for the flexibility to install a reliable water meter virtually anywhere, independent of a power line—without sacrificing accuracy or performance. The flow detector has no parts in the flow stream, thus preventing pressure loss and keeping maintenance to a minimum—even in less than ideal fluid conditions. Thanks to sophisticated, processor-based signal conversion, the M-5000 can achieve an accuracy of ±0.5% and a flow range better than 300:1. The mag meter is comprised of two main components: a detector and amplifier. The M-5000 amplifier can be integrally mounted to the detector, or it can be mounted remotely. Housed in a NEMA 4X (IP66) enclosure, the amplifier targets a variety of applications and is well suited for the diverse water and wastewater treatment industry.


The M-2000, delivers precise flow measurement for a variety of purposes—on potable meter lines, in fluids with suspended solids, and most applications requiring exacting measurement.


As with all Badger Meter electromagnetic meters, the M-2000 is built without any moving parts to impede the flow stream. And because of its advanced, processor-based signal conversion, the M-2000 can achieve an accuracy of ±0.25%. The non-intrusive, completely open flow tube design virtually eliminates pressure loss. The M-2000 is a general-purpose detection mag meter built for field verification testing with the use of a simple, handheld device. The ability to verify mag meters in the field eliminates the need for remote testing and increases the frequency of testing to maintain functionality and accuracy. The wide selection of liner and electrode materials helps to ensure maximum compatibility and minimum maintenance over a long operating period.


RatingGeneral Purpose
Size0.25 to 80 in.0.5 to 24 in.
Temperature Rangeup to 302°F
Flow Range0.10 to 39.4 ft/sec (0.01 to 597,525 gpm)0.1 to 32.8 ft/s (0.08 to 44,786 gpm)
Power Supply10 to 36V DC | 85 to 265V AC3.6V internal lithium batteries (10-year battery life)



Be the first to review this product
Add your review: