Model RS Safety Stop Conveyor Switch
Description
The Model RS pull cord is a safety stop control that provides a quick, positive shut-off of dangerous equipment in emergencies. It's actuated by a cable pulled by endangered personnel. The outputs of the Model RS can control up to 4 separate circuits, depending on the model chosen. These alarms can include one for machinery shutdown and one for alarm.
This control is designed to act as an emergency stop for conveyors and other moving machinery. This standard housing construction is corrosion-resistant cast aluminum, with an optional polyester or epoxy powder coating. The operating handle must be manually reset after the problem has been corrected.
Specs
Model | Switch Type | Contact Voltage Rating | NEMA |
---|---|---|---|
RS-2 | 2 single pole double throw (SP/DT) | 20A @ 125, 250 or 480V AC; 1 hp @ 125V AC; 2 hp @ 250V AC; 0.5 A @ 125V DC; 0.25 A @ 250V DC | NEMA Type 1, 3, 3R, 4, 4X |
RS-2L | SP/DT | 20A @ 125, 250 or 480V AC; 1 hp @ 125V AC; 2 hp @ 250V AC; 0.5 A @ 125V DC; 0.25 A @ 250V DC | |
RS-5 | 2 double pole double throw (DP/DT) | 15A @ 125 or 250V AC; 0.75 hp @ 125V AC; 1.5 hp @ 250V AC | |
RS-5L | DP/DT | 15A @ 125 or 250V AC; 0.75 hp @ 125V AC; 1.5 hp @ 250V AC | |
RS-2D | SP/DT | 20A @ 125, 250 or 480V AC; 1 hp @ 125V AC; 2 hp @ 250V AC; 0.5A @ 125V DC; 0.25A @ 250V DC | NEMA Type 3, 4, 4X; Type 9: Class II (Div. 1 & 2), Groups E, F & G |
RS-5D | DP/DT | 15A @ 125V or 250V AC; 0.75 hp @ 125V AC; 1.5 hp @ 250V AC | |
RS-2X | SP/DT | 20A @ 125, 250 or 480V AC; 1 hp @ 125V AC; 2 hp @ 250V AC; 0.5A @ 125V DC; 0.25A @ 250V DC | NEMA Type 7: Class I (Div. 1 & 2), Groups C & D & 9: Class II (Div. 1 & 2), Groups E, F & G |
RS-2XL | SP/DT | 20A @ 125, 250 or 480V AC; 1 hp @ 125V AC; 2 hp @ 250V AC; 0.5A @ 125V DC; 0.25A @ 250V DC | |
RS-5X | DP/DT | 15A @ 125 or 250V AC; 0.75 hp @ 125V AC; 1.5 hp @ 250V AC |