PA2000t LABEL PRINTER/APPLICATOR
Description
The new Tharo PA2000t Label Printer/Applicator is a cost-effective accessory for the Tharo H-400/H-600 Series of thermal/thermal transfer bar code label printers. The Tharo PA2000t Label Printer/Applicator is easy to use, with minimal adjustments necessary, quick setup and changeover for applying labels to the top or side of varying height or width products.
The PA2000t features a smaller footprint, 15” wide x 32” tall x 30” long, than other Printer/Applicators, with a remote front panel for easy access, regardless of the orientation of the applicator. It has an all-metal cabinet and is made to last with time-tested components. The heavy-duty cylinder will withstand high stress in side labeling, with minimal deflection, when using a conveyor.
With or without a computer attached, the PA2000t is automatic or semi-automatic; has the ability to apply labels from 2” x 1” to 4.5” x 8” in size, using the 6” wide printer, labels as large as 6” x 8” can be accommodated. The PA2000t can apply up to 58 labels per minute depending on printer used, label size and height of product.
The PA2000t features a smaller footprint, 15” wide x 32” tall x 30” long, than other Printer/Applicators, with a remote front panel for easy access, regardless of the orientation of the applicator. It has an all-metal cabinet and is made to last with time-tested components. The heavy-duty cylinder will withstand high stress in side labeling, with minimal deflection, when using a conveyor.
With or without a computer attached, the PA2000t is automatic or semi-automatic; has the ability to apply labels from 2” x 1” to 4.5” x 8” in size, using the 6” wide printer, labels as large as 6” x 8” can be accommodated. The PA2000t can apply up to 58 labels per minute depending on printer used, label size and height of product.
Specs
• Minimum Label Size: .20" x .20" (5mm x 5mm) with specialty tamp 3" x 1" (76.2mm x 25.4mm) with Tamp Blow • Maximum Label Size: 6" x 8" (152.4mm x 203mm) • Placement Accuracy: Stationary: +/- 0.01" (.25mm) or Moving: +/-0.125" (3mm) (for example: conveyor belt applications) • Speed: Up to 58 labels per minute* • Weight of Applicator: 27 lbs (12kg) - 37 lbs (17kg) • Weight of Stand: 120 lbs (55kg) • Standard Stroke Length: 17" total (432mm) (10" (254mm) below table) Custom length cylinders are available upon request. • Air Requirement: 75 to 90 psi (5 to 6 bar) • Printer Type: Tharo H-427, H-436, H-626 or H-634 Direct Thermal or Thermal Transfer Printers • Power Source: Switchable: 100V 60Hz or 230V 50Hz • Environmental: Temp 50-95�F (10-35�C) at 10-85% humidity • Standards: Built to CE safety and emissions standards. RoHS compliant upon request.