Slim, 4-Axis HMC
Description
Designed as slim as possible, the KIWA KH-4100kai is a high-performance horizontal machining center with full rotary B-axis and can be installed in a space for a vertical machining center.
Benefits include simultaneous four-axis machining, a wide center trough in the machining area, and a unique coolant chip flow system. The BIG-PLUS 40-taper spindle, backed by 20 hp and capable of running at 15,000 rpm, guarantees rigidity and uniform cuts. A 60-tool automatic tool changer comes standard, giving operators versatile tooling options. Chips will go directly down the center trough for disposal at the rear of the machine. Sheet metal covers on both sides are steeply slanted to guide chips to the trough. Travel is 20.1 in./ 510 mm on the X, Y, and Z axes.
Specs
- (4) Simultaneously Controlled Axes
- Provision for Coolant Through Spindle
- Coolant Chip flow System
- Spindle Oil Cooler
- Pallet and Chip Wash
- Chip Conveyor – LNS-Turbo MH500
- Tool Life Management
- AICC2 400 block look ahead
- 1280 Meter / 512 kB Memory
- Helical Interpolation
- 200 Tool Off Sets
- Macro Programming
TRAVEL | |
|---|---|
| X-Axis Travel | 20.1 in. |
| Y-Axis Travel | 20.1 in. |
| Z-Axis Travel | 20.1 in. |
| 4th-Axis Travel (Rotary Table) | 0 to 360-deg. |
PALLET | |
Pallet Surface to Spindle Center | 2APC: 2.0 to 22.0 in. |
| Pallet Center to Spindle Nose | 3.9 to 24 in. |
| Pallet Size | 15.7 x 15.7 in. |
| Pallet Load Capacity | 1,100 lb. |
| Max. Workpiece Size | 21.7 x 33.5 in. |
| Pallet change Time | 12.5 sec |
FEED RATE | |
| X-Axis Rapid Traverse | 3,149 in/min |
| Y-Axis Rapid Traverse | |
| Z-Axis Rapid Traverse | |
| 4Th Axis | 37 rpm |
| Cutting Feed (X/Y/Z) | 1,181 in/min |
SPINDLE | |
| Spindle Power | 20 HP |
| Spindle Speed | 15,000 |
| Spindle Taper | Cat 40 |
TOOLS | |
| Standard Number of Tools | 60 |
| Maximum Tool Weight | 17.6 lb. |
| Maximum Tool Length | 15.7 in. |
| Maximum Tool Diameter | 3.3/5.5 in. |
| Tool Changing Time- Tool to Tool | 0.9 sec |
GENERAL | |
| Coolant Tank Capacity | 79.3 gal |
| Machine Weight | 2APC+60ATC: 16,940 lb. |
| Machine Control | FANUC 0i-MF |