Submersible Transmitter Combining Pressure & Temperature Measurement.

Description

STS is pleased to announce the NEW ATM/N/T precision Pressure & Temperature depth and level transmitter which is fully submersible for monitoring ground or surface water, waste water or tank level measurement. The ATM/N/T features a rugged modular design in 316L SS or titanium. Full scale ranges from 40” WC through 360 psi are available with a proof pressure of typically greater than 3 x FS and a static accuracy of typically 0.1%. Operating process temperatures from 25 to 125°F are acceptable. The supply voltage from 15 to 30 VDC provides a range of dual output signals for pressure and temperature such as 4 to 20 mA, 0 to 20 mA, 0 to 5 VDC or 0 to 10 VDC for the full scale. The ATM/N/T can be built with either Polyurethane, Polyethylene or FEP cable up to 5,000 feet. Many features are available including a field replaceable cable version.

Specs

• Pressure Measurement • Pressure ranges • Any range from 1 to 8,500 psi FS available, in • any engineering units such as psi, Pa, • in H20, bar. • Absolute from 0 - 2 to 0 - 360 psia FS • Gauge from 0 - 1 to 0 - 360 psig FS • Sealed from 0 - 150 to 0 - 8,500 psisg FS* • Compound ranges from -15 to 360 psig FS** • Neg. ranges from 0 to -1 to 0 to -15 psig FS** • Consult factory for higher pressure ranges • **Consult factory • Proof pressure • FS up to 15 psi: 45 psi • FS > 15 psi up to 4000 psi: 3 x FS • FS > 4000 psi up to 8500 psi: 12,000 psi • Consult factory for higher proof pressure • Burst pressure • FS up to 350 psi: > 3000 psi • FS up to 8500 psi: > 12,000 psi • Consult factory for higher burst pressure • Operating temperature range • -25 to 185°F (ambient) • -40 to 212°F (process media, Fig. 1) • -40 to 300°F (process media with cooling ext., • Fig. 2) • Compensated temperature range • 32 to 160°F (standard) • -15 to 185°F (option) • -40 to 185°F (option) • Temperature effects • ±1.5% total for 32 to 160°F • ±2% total for 32 to 160°F, 7 to 30 psi • ±2% total for -10 to 185°F • ±2.5% total for -10 to 185°F, 7 to 30 psi • Long term stability • 0.1% FS/yr for pressure ranges > 30 psi • Prorated for ranges below 30 psi • Under standard conditions • Supply voltage • 15 - 30 VDC • Infl uence of supply voltage < 0.1% FS • Output signals for pressure & temp. • Dual 4 - 20 mA, 0 - 20 mA, 0 - 5 VDC or • 0 - 10 VDC • Load resistance • Current output: RL ≤ (Vsupply - 5V)/0.02A • Voltage output: RL > 10kOhm • Infl uence of load resistance < 0.1% FS • Insulation resistance  50 megohms @ 500 VDC (@ 68°F) • Response time • < 1ms, 10 to 90% FS • Pressure media compatability • Stainless steel 316L • Pressure connection • 7/8“-14 UNF male frontal or fl ush diapgragm • Using a regular pressure connection will • position the temperature sensor approximately • ¾“ back from the process fl owline. • Consult factory for other connections • Electrical connection • DIN 43650 (Fig. 3) • 6-pin bayonet per MIL-C-26482 (10-6) (Fig. 4) • Polyurethane cable (Fig. 5) • Demountable versions/other types available • Weight • 5 oz approximate (not including cable) • Vibration • 10 g, 10 to 2000 Hz • Mechanical shock • 100 g / 6 ms
Be the first to review this product
Add your review: